When choosing the right motor, it is crucial to understand and consider various key parameters. This article provides an in-depth look at the key parameters you need to know when selecting a motor to help you make an informed choice among the many options.

1. Voltage:
Voltage is the power required to run a motor. Ensure that the rated voltage of the selected motor matches the voltage of the power supply system to ensure normal operation.

2. Current:
Current represents the electrical energy consumed by the motor during operation. When selecting a motor, ensure that the current does not exceed the carrying capacity of the power supply system to prevent overload.

3. Speed:
Speed indicates the speed at which the motor rotates, usually in revolutions per minute (rpm). Select the right speed according to the load requirements of the application to ensure that the motor can provide sufficient power.

4. Torque:
Torque is the rotation torque provided by the motor. Different applications require motors with different torque levels, and factors such as inertia and resistance of the load should be considered when selecting them.

5. Efficiency:
The efficiency of a motor represents its ability to convert input electrical energy into mechanical energy. Choosing a high-efficiency motor can reduce energy waste and improve system performance.

6. Insulation Class:
Insulation class indicates the insulation capacity of the motor, usually expressed in letters. Select the appropriate insulation level to ensure safe operation of the motor in wet or high temperature environments.

7. Ambient Temperature:
Performance of the motor at a specific ambient temperature. Select a motor that ADAPTS to the target operating environment temperature to ensure stable operation under various conditions.

8. Duty Cycle:
The running cycle represents the ratio of the running time and rest time of the motor in a certain period of time. Different applications require motors with different operating cycles, such as intermittent or continuous operation.

9. Ingress Protection Rating:
The protection level indicates the dustproof and waterproofing ability of the motor. Select the appropriate protection level of the motor to ensure that it can operate reliably in harsh environments.

Understanding and considering these key parameters can help you choose the best motor for your application and ensure stable and efficient system operation.