Shenzhen leesn Electromechanical Co., Ltd. is a high-tech enterprise specializing in providing motion control system solutions, headquartered in Shenzhen, the capital of science and technology and innovation. Founded in 2006, the company has been exploring and advancing for many years with excellent research and development capabilities and rich marketing experience, and has built a sound corporate strategy and talent structure. It has gradually developed into a group enterprise integrating research and development, production, sales and service... More +
Committed to providing customers with more stable and reliable products and better quality and rapid service
In the selection and use of stepper motor, the most common is the pulse signal and IO signal, what do these two signals represent? A pulse is a waveform, an electrical shock (voltage or current) of very short duration. According to a certain time interval of high and low level jump signal, the conventional is 50% duty cycle rectangular wave. A pulse signal. The motor turns.
How to adjust the direction of the integrated stepper servo motor? Our integrated stepper servo motor, the use of closed-loop stepper motor, we only need to find the corresponding direction dip switch button, by adjusting the dip switch up and down, you can realize the direction of free control. Isn't that simple?
1、 first play the multimeter to the resistance gear 2、 then the 4 lines of the stepper motor are divided into A and B two groups, A+ and A- for a group,B + and B- for a group 3、Connect the resistance probe to the two windings of the stepper motor respectively.
The use of the stepper motor driver is very troubling, this small series to share a how to connect the drive to the local area network, if you have a backup port connected to the switch or router, you can set the drive's IP address and compatible with your network, rather than using what other means, this is a simple connection method, This technique also allows you to connect multiple drives to your computer. If you are an enterprise network, please contact your system administrator before connecting any new devices to your network, he should be able to arrange to give you a suitable address to help you make the connection.
1、the power light is not bright - check the power supply circuit, normal power supply. 2、the motor locks the shaft but does not turn - the pulse signal is weak, the signal current is increased. 3、Too little speed - choose the right subdivision. 4、The drive is protected -- Power it on again. 5、enable signal problem - The enable signal is stretched or not connected. 6、the command pulse is wrong - check whether there is a pulse output on the machine.
Please wait for the staff to contact you~
Scan QR code to follow "Lishan Electromechanical"
Get more information