news

News information

Current location：

Home > news

Nema14(35mm) integrated stepper servo motor

Frame number: 35mm Holding torque: 0.1-0.4N.M Power supply voltage: 24-36VDC Full closed loop: 1000 wire (4000 Counts) encoder feedback Support torque mode: collision back to the original, constant torque, clamping object Full operation mode compatibility: IO control, pulse control, command control, internal programming

More
2023 Dragon Boat Festival holiday notice

Holiday time: June 22 - June 24, a total of 3 days, warm tips: June 21 after 16:00 orders will be delayed to June 25 one after another, during the holiday only orders will not be delivered, please understand the inconvenience caused to you! Please contact the corresponding sales engineer in case of emergency during the holiday.

More
Nema11(28mm) integrated stepper servo motor

Integrated stepper motor seat number: 28mm Holding torque: 0.08-0.24N.M Power supply voltage: 8-24VDC Full closed loop: 1000 wire (4000 Counts) encoder feedback Support torque mode: collision back to the original, constant torque, clamping object Full operation mode compatibility: IO control, pulse control, command control, internal programming Input compatible: 5-24VDC, output collector OC output, withstand voltage 30VDC Comprehensive protection: overvoltage, undervoltage, overcurrent, open winding, position deviation

More
How do I connect a stepper motor drive to a LAN

The use of the stepper motor driver is very troubling, this small series to share a how to connect the drive to the local area network, if you have a backup port connected to the switch or router, you can set the drive's IP address and compatible with your network, rather than using what other means, this is a simple connection method, This technique also allows you to connect multiple drives to your computer. If you are an enterprise network, please contact your system administrator before connecting any new devices to your network, he should be able to arrange to give you a suitable address to help you make the connection.

More
Nema08(20mm) integrated stepper servo motor

Motor sizer: 20mm Holding torque: 0.01-0.05N.M Power supply voltage: 8-24VDC Full closed loop: 1000 wire (4000 Counts) encoder feedback Support torque mode: collision back to the original, constant torque, clamping object Full operation mode compatibility: IO control, pulse control, command control, internal programming

More
What are the dimensions of the integrated stepper motor

Intelligent integrated stepper servo motor is also known as the integrated stepper motor, which consists of products including stepper motor, driver, motion controller and encoder, integrating each unit of the stepper system into a whole, reducing the space by more than 40%, reducing the wiring by more than 50%, with good electromagnetic compatibility characteristics, simple system topology, It greatly increases the reliability and practicality of the stepper system, and is the best choice for customers with small installation space and high degree of system integration.

More

< ...4 5 6 7 8 ...>

Related recommendations/ Recommend

Contact Li San / Contact Us

Telphone：+86 13612899148
Email：md@leesn.com
Fax：+86 0755-8529-7917
Address：5th Floor, Building A2, Xiwan Zhiyuan, Hangkong Road, Bao'an District, Shenzhen

Online message / Recommend

Submitted successfully

Please wait for the staff to contact you~

Scan QR code to follow "Lishan Electromechanical"
Get more information

news

Nema14(35mm) integrated stepper servo motor

2023 Dragon Boat Festival holiday notice

Nema11(28mm) integrated stepper servo motor

How do I connect a stepper motor drive to a LAN

Nema08(20mm) integrated stepper servo motor

What are the dimensions of the integrated stepper motor

Submitted successfully