Products

Current location:

Home >   Products   >   Closed-loop stepper motors
LS86E85-800-1.jpg
LS86E85-800-2.jpg
LS86E85-800-3.jpg
LS86E85-800-4.jpg

LS86E85-K4J60 Closed-loop stepper motors

LEESN new generation 86mm*86mm(NEMA34) two-phase 1.8° closed-loop stepper motor, mounting hole distance 69.6mm, built-in 1000-wire encoder, low heating, high stability, high consistency, greater torque, higher performance, recommended for the driver DE86.
① Spindle mode:
Provide single flat, double flat, keyway, hobbing and other shaft delivery modes;
② Lead mode:
According to different application requirements, provide customized winding and routing methods;
③ Accessories selection:
Provide a variety of accessories for the stepper motor, such as planetary reducer, power off brake, etc.
Closed-loop stepper motor is a kind of stepper motor system, which is different from the traditional open-loop stepper motor system. It has a feedback control mechanism, which can monitor and correct the position error of the motor in real time to improve the performance and accuracy.

Matching products

Specification parameters
  • Phase number
    two-phase
  • Step Angle
    1.8 °
  • Step Angle error
    Below ±0.09°
  • Fuselage length
    141mm
  • Axis length
    32mm
  • Shaft diameter
    14mm
  • Rated current
    6.0 A
  • Holding torque
    8.5 N.M
  • Phase resistance
    0.60 Ω
  • Phase inductance
    4.2 mH
  • Moment of inertia
    ≈2800g.c㎡
  • weight
    ≈4200g
  • Service temperature range
    0 ℃ + 50 ℃
  • Service humidity range
    20%RH - 90%RH

Related products